articles

Solar Hot Water Rebate

In order to help homeowners, landlords or tenant replace their electric storage hot water systems with solar or heat pump hot water systems the Australian Government is offering a rebate of $1000 for the solar hot water system or $600 for the heat pump hot water system. The State Government also offers a $300 rebate for energy efficient Hot water systems.

This offer was a part of the Governments Energy Efficient Homes Package which came into effect on 3 February 2009.

This hot water system rebate helps you save money on your power bills and reduce your household’s greenhouse gas emissions. Accounting for around 25% of the home energy you use is the electric storage hot water systems.

Installing a climate friendly hot water system can save a family up to $700 off their energy bills each year.

 


Frequently Asked Questions



Where do the rebates come from?

$300 from the state Government
$600 from the federal Government
$1140 in renewable energy certificates*

What is the Solar Hot Water Rebate?

The Solar Hot Water Rebate component of the Australian Government's Energy Efficiency Homes Program provides rebates of $6000 to eligible applicants to install solar and heat pump hot water systems in existing homes. The new hot water system must replace an electric storage hot water system which are the most greenhouse intensive of household hot water systems and generate the largest amount of greenhouse gas emissions.

The rebate encourages switching to alternative hot water technologies by addressing the up-front cost barriers to climate friendly systems, which also deliver low operating costs for the household.

The rebate is to help households replace existing electric storage hot water systems. Rebates are not available for replacing older solar or gas hot water systems.

Who can apply for the rebate?

Applicants for the hot water heater rebate must be the owner or tenant of the dwelling where the system was installed. The application process is simple and straightforward and is completed at the time the new hot water system is being installed. Suppliers and installers of solar hot water systems cannot apply for the Australian Government Solar Hot Water Rebate Component on behalf of their customers.

Government Agencies or occupants of public housing are not eligible for this rebate.

Can I apply for the rebate if I am renting?

Yes. The system for which a rebate is being claimed must be installed at a principal place of residence. An applicant can be the owner or the tenant of the dwelling. A tenant should not install a system without approval from the owner of the dwelling. The sharing of any costs is a matter for the landlord and the tenant to negotiate. Regardless of whether you are an owner or a tenant, all other eligibility requirements must be met.

Can I get the rebate for a system I install on my investment property?

Yes. The system for which a rebate is being claimed must be installed at a principal place of residence. There is no requirement that this is the applicant's principal place of residence. An owner may apply for a rebate on more than one property.
The sharing of any costs is a matter for the landlord and the tenant to negotiate.

Regardless of whether you are an owner or a tenant, all other eligibility requirements must be met.

Are rebates available for holiday homes?

Rebates are not available for holiday homes. To ensure the largest environmental benefit will be achieved, the rebate program has been designed to replace electric storage hot water systems in principal places of residence.

Is the rebate means tested? No.

How will the payment be made?
Payment is made by electronic funds transfer into the bank account of successful applicants. Applicants must be the owner or tenant of the dwelling where the solar or heat pump hot water system was installed. The applicant provides a bsb and bank account number and the funds are directly deposited. Bank details will only be used to make the payment. Storage and disposal of bank account and other personal details will be managed in accordance with the Privacy Act 1988.

Back to the top
 

Stop Running Toilets from Wasting Your Water

Running toilets are not only noisy and annoying, they are wasteful, too. Fixing a running toilet is usually a simple, inexpensive fix any homeowner can do.

A running toilet is usually the result of one of two things: a poorly functioning ball-cock valve or flush-valve assembly. To find the source of your running toilet problem, take a look inside. Remove the top cover from the toilet, then flush and see what happens.

If the water runs but does not fill up the tank, the flush-valve (stopper ball) at the bottom of the tank is the problem.

 

How to Install a Bathtub: Part Three

Setting New Tub 

Now that you are ready to set the new tub into place, one of two things will happen. If you are using the old faucet system, simply slide the new tub in the exact same way as the old one came out and put your handles and spouts back on. If, however, you are using this opportunity to upgrade the look of your plumbing, then you will need to do a little work before you slide that new tub into place.

 

How to Install a Bathtub: Part Two

Removing Old Tub

Locate Shutoff Valves and Turn Off Water:

Once you have all of your supplies gathered, it is time to move to step one. Turn off the water. Disaster would result if you tried to remove your old tub without turning off the water. If the person who built your house was feeling kind, they left you an access panel to the shutoff valves, and this job will be fairly simple. Check the wall behind the plumbing. It may be in a closet or in an inconspicuous place in a hallway. If the tub is located on the first floor and you can't find an access panel, check the basement. The shutoffs may be located under the tub and you will be able to access them from your basement ceiling.

 

How to Install a Bathtub: Part One

Tools and Supplies

Supplies to Have on Hand Before you Begin:

Once you have selected your new unit and your faucet, you are well on your way. Don't leave the home improvement store yet though. There are a few other things that you need to make sure you have on hand before you begin. It is often true that unexpected things can come up during any home improvement project, but by making sure that you have everything on the following list before you begin, you may save yourself some extra running around in the midst of trying to complete your project.

 
<< Start < Prev 1 2 3 4 5 6 Next > End >>

Page 1 of 6
Quantum Rheem Saxon Dux stiebel-eltron
Vulcan Bosch Everhot Rinnai

Call 13 10 91
"The Plumbing Doctor Gets It Done"