RIN-INFINITY-26SS

Introducing Australia's first dedicated 'Water Saving' hot water system. It has all the great features of the standard Rinnai INFINITY Continuous Flow, with the addition of a circulating pump to pre-heat the water in the pipes. This may take a minute or two depending on the size of your home, but will help you save literally tens of thousands of litres of water over the life of your hot water system.

Technical Data

Model	RIN-INFINITY-26SS
Installation	External
Hot Water Capacity raised at 25 Degrees C (unmixed)	26 L/min
Hot Water Capacity raised at 20 Degrees C (unmixed)	26 L/min
Gas Rate MJ/h (Max)	199
AS4553 Efficiency Star Rating	5.1
Dimensions (mm) : Height	600
Dimensions (mm) : Width	470
Dimensions (mm) : Depth	239
Colours	Euro White
Factory Default Temperature (Celsius)	50 Degrees C
Water Pressure (kPa) : Minimum	100
Water Pressure (kPa) : Maximum	500
Gas Rate Min/Max : NG	199 MJ/h
Flow Rate 25 Degrees C/Max : l/min	26 l/min
Star Rating	5.1
Connection Sizes Gas/Hot/Cold (mm)	20 / 20 / 20
Status Monitor	No
Dimensions (mm) : Height Inc Brackets	644
Dimensions (mm) : Hot Water Outlet (From Wall)	N/A
Dimensions (mm) : Hot Water Outlet (From Centre)	N/A
Dimensions (mm) : Cold Water Inlet (From Wall)	119
Dimensions (mm) : Cold Water Inlet (From Centre)	49
Dimensions (mm) : Gas Connection (From Wall)	79
Dimensions (mm) : Gas Connection (From Centre)	142
Dimensions (mm) : Condensate Outlet (From Wall)	83
Dimensions (mm) : Condensate Outlet (From Centre)	47
Dimensions (mm) : Gas Connection Length (From Base)	40
Dimensions (mm) : Cold Connection Length (From Base)	50
Dimensions (mm) : Condensate Connection (From Base)	N/A
Dimensions (mm) : Condensate Fitting Diameter	N/A
Weight (kg)	26
Hot Connection Length (from base)	42
Return Loop Connection (from wall)	108
Return Loop Connection (from centre)	166
Return Loop Connection length (from base)	50
Return Loop Fitting Diameter	R20 3/4
Gas Fitting Diameter	20